Quilt-Pro Systems - Software Updates

Updates for current software versions:

Quilt-Pro Ver 5 for Windows

Quilt-Pro Ver 5 for Macintosh

Block Factory and Foundation Factory Version 2 for Windows

Easy Angle Partner and Foundation Factory for Macintosh

123-Quilt! Ver 2 for Windows

Print and Sew for Windows

Quilt-Pro File Manager (Block Importer)

Click here for updates for previous software versions

Updater for Windows version of Quilt-Pro Version 5.
(2008-08-20)

Version 5.1.2 of Quilt-Pro. Click here to download the latest update for Quilt-Pro Version 5. You must already have Quilt-Pro 5 installed on your system to use this file. It is 2.04 MB (2,046,716 bytes) and will take about 14 minutes to download if you are using a 28.8 kbps modem.

Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\wup512.exe. The updater will begin installing.

Version 5.1.1 of Quilt-Pro in French. Download this if you have an English only version of Quilt-Pro installed and would like to have Quilt-Pro display everything in French. NOTE: This update is large, 7.3 MB (7,340,401 bytes) and includes new help files and an online version of the manual in French. It would take about 44 minutes to download with a 28.8 kbps modem. If you already have a French version of Quilt-Pro, and just need to update to the latest version, download the normal updater.

Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\wup512-French.exe. The updater will begin installing.

Updater for Macintosh version of Quilt-Pro Version 5
(2007-05-11)

Version 5.0.7 Build 9 of Quilt-Pro. Click here to download the latest update for Quilt-Pro Version 5. This version (5.0.7 B9) is a Universal application. This updater will update Version 5.0.5 or later to 5.0.7 Build 9. If you do not already have version 5.0.5 or later. If you have an earlier version, you will need to download the Build 5 updater below and apply it first. This updater is 4.9 MB (5,160,346 bytes) and will take about 30 minutes to download with a 28.8 kbps modem.

Version 5.0.5 Build 5 of Quilt-Pro. Click here to download the latest update for Quilt-Pro Version 5. This updater will update any Quilt-Pro Version 5 for Macintosh to 5.0.5 Build 5. This updater is 1.81 MB (1,902,570 bytes) and will take about 12 minutes to download with a 28.8 kbps modem.

The Macintosh updater files are BinHex encoded files. Your Mac web browser will normally decode them for you. If, for some reason it doesn't, you will need something like Stuffit to decode the file. You may buy Stuffit at almost any Mac retailer or download a free expander version from http://www.stuffit.com. Look for the link that says 'Download Stuffit Expander'.

The updater will require the entry of the username and password of an admin user on the Mac before it will run.

Updater for 123-Quilt! Version 2.
(2009-08-04)

Version 2.0.7 of 123-Quilt. Click here to download the latest update for 123-Quilt Version 2. You must already have 123-Quilt Version 2 already installed on your system to use this file. It is 3.7MB (3,701,728 bytes) and will take about 22 minutes to download if you are using a 28.8 kbps modem, 12 minutes with a 56k modem.

Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\123QuiltV2Update.exe. The updater will begin installing. After the install is completed, you must reboot your computer. The installer will remind you when it is finished.

Updater for Print and Sew Version 1.
(2010-05-11)

Version 1.0.5 of Print and Sew. Click here to download the latest update for Print and Sew Version 1. You must already have Print and Sew Version 1 already installed on your system to use this file. It is 5.95MB (6,250,920 bytes) and will take about 37minutes to download if you are using a 28.8 kbps modem, 20 minutes with a 56k modem.

Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\PrintSewUpdate.exe.exe. The updater will begin installing.

Updater for Windows version of Block Factory and Foundation Factory Version 2.
(2008-04-16)

Version 2.4.4 of Foundation Factory. Click here to download the latest update for Foundation Factory Version 2. You must already have Foundation Factory installed on your system to use this file. It is 809K (828,559 bytes) and will take about 5 minutes to download if you are using a 28.8 kbps modem.

Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\ff2updater.exe. The updater will begin installing.

Those of you with the KC Star Vol-1 CD will also need to download this file (KCStarLib.exe, 78,122 bytes). It is a self-extracting zip file. Just run it after downloading (see instructions above). By default, it will unzip to C:\Program FilesKCStar. If that is not where you installed the KC Star CD, change it to the correct location.

Updater for Macintosh version of Easy Angle Partner and Foundation Factory Version.
(2007-04-10)

Version 2.4.2 of Foundation Factory. Click here to download the latest update of Foundation Factory for Macintosh. This updater is 1.36MB (1,421,558 bytes) and will take about 9 minutes to download with a 28.8 kbps modem.

The updater file is a BinHex encoded file. Your Mac web browser will normally decode it for you. If, for some reason it doesn't, you will need something like Stuffit to decode the file. You may buy Stuffit at almost any Mac retailer or download a free expander version from http://www.stuffit.com. Look for the link that says 'Download Stuffit Expander'.

The updater will require the entry of the username and password of an admin user on the Mac before it will run.

Quilt-Pro File Manager for Windows Ver 1.3
(2010-02-04)

This is the Quilt-Pro File Manager utility program. With this program you may copy the blocks from any Block Factory, Foundation Factory or Strip Piecing Wizard program (except the Quilter's Newsletter Edition) into Quilt-Pro version 3 or higher. Macintosh users, consult your Foundation Factory CD for information about installing blocks into Quilt-Pro.

Click here to download the program now (3.41 MB or 3,578,222 bytes). Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\QPFileManager.exe.

If you have problems downloading the EXE file or would like a smaller download (958 KB 981,358 bytes), Click here to download a zip file containing the program. Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\QPFileManager.zip. Extract the QPFileManager.exe to C:\. Go to the Windows start button and select Run. When the Run dialog box appears, type in C:\QPFileManager.exe.